Two Deck Bus Controls
Each bus selects USB Port A or B computer playback, a Phono / CD deck input, or an Aux line-level input.
Gain trim and metering.
Sweepable Low / High-pass effect Filter.
3-band full-cut tone controls:
Kill switches are momentary on/off.
Press SHIFT and a Kill to latch it on.
Direct Serato Deck Controls
Software FX on/off button.
FX knob parameter adjustment:
Turn to scroll through FX.
Press to select the FX.
Hold SHIFT to change the Beats parameter.
LOOP knob selects the loop length.
Press it to engage Auto Loop.
Hold down ROLL for Loop Roll.
LIBRARY knob scrolls songs or crates:
Press to load a song or crate.
Hold SHIFT to tab between song and crate selection.
TRANSFORM joystick:
Press for Transform on/off.
Transform on: any direction cuts the audio.
Transform off: multifunction software control (gray text).
Trigger Serato DJ Cues and Samples
CUES / SAMPLES button toggles between Cues and Samples.
The button is lit when Cues are active.
Four Cues per Deck. The active USB follows the Deck source selection.
Lit button colors match the Cue colors in Serato DJ software.
Press an un-lit button to create a new Cue. Hold SHIFT to delete a Cue.
Six Sample triggers and Bank select buttons (Bank up and Bank down).
A lit button indicates a ready-to-play sample in Serato DJ.
The USB Aux Input is usually from the Serato SP-6 sample player, with it's own Level control, Low / High-pass sweep Filter and headphone cue. The USB Cue overrides any Deck Cue when it's on.
Dual USB Ports for Simple DJ Changeover
With a computer plugged into each USB port, simply switch a mixer Deck selector to USB A or USB B and audio and MIDI are assigned. Seamlessly switch from one DJ to the next using Serato DJ or other 3rd-party audio software.
Each port can stream 20 channels of low-latency audio at 44.1, 48, or 96 kHz.
A typical setup includes two Serato DVS decks, software FX through independent USB digital inserts for each Deck, and the SP-6 sample player on its own USB Aux input.
Deck Cue, Pan, and Split Cue
The Cue slider cues Deck 1 or Deck 2 by moving the slider accordingly. This lets you adjust a Deck volume in the headphones without raising the Deck Gain control.
When Split Cue is off, the Cue / Main Pan knob balances how much stereo cue and stereo main mix you hear in the headphones.
When Split Cue is on, the Cued Deck goes to the left headphone cup and the Main mix goes to the right cup. The Cue / Main Pan knob balances how much Cue (left) and Main (right) is heard in the headphones.
TTM57mkII Unique Features
Durable Lexan faceplate (no paint to wear off)
Channel High, Mid, and Low Kill switches
Filter Resonance adjustment
MIDI-mappable footswitch jack to any parameter
SP-6 Sampler Input Filter control
SP-6 Sampler Input Headphone Cue
Headphone Split Cue Mode (Cue in the left ear and Main Mix in the right ear.)
Changeable EQ crossover points
Transform Joysticks with extra up/down/left/right functions
Easy access to Serato deck INT mode
Slip ON/OFF quick controls
Scroll access through all Serato DJ-FX
Adjustable Serato DJ-FX Wet/Dry controls
Session Output with a Volume Control
External effects processor loop with +4 & -10 level switch
Up-fader Channel Swap switch
Magnetic Crossfader and Channel Faders
The proprietary Rane magnetic faders are fast, accurate, and long lasting.
The design uses non-contact technology previously reserved for demanding aerospace and industrial applications. No travel noise—no bleed—ever.
Rane's magnetic faders accurately translate hand motion into precise audio level control. Non-contact fader technology is the only way to fully address the needs of the professional performance DJ.
Both channel faders and the crossfader are magnetic. These faders are easy to clean, and with proper maintenance, should last the life of the mixer. Should one become damaged, you can easily replace it. All three faders are interchangeable.
Class Compliant Dual USB Ports
Dual USB ports provide simultaneous connection of two computers, enabling back-to-back sets between laptop DJs running different software without compromise or interruption—no easy feat.
The USB ports are 100% class compliant, allowing hook-up to any Mac OS X device without the need for an additional driver.
The included high-performance ASIO driver runs most Windows DAW and DJ software. Get it from the Downloads tab on this page.
MIDI end points are class-compliant with both OS X and Windows devices.
Serato DJ software
DJs currently using Serato Scratch Live with supported Rane hardware have the option to migrate to the new and improved Serato DJ.
Serato DJ provides support for DVS (digital vinyl system), iZotope FX, Sync, Slip Mode, more Cue points, jump-to-loop, an improved 24-slot sampler and takes advantage of the high performance, ultra-low latency Rane ASIO and Core Audio drivers. Both programs share compatible song libraries, the same general workflow and deck layout.
You can have both programs installed, and use one or the other. You can also use the included Core Audio and ASIO drivers to run any other popular DJ and DAW software program you like.
Virtual DJ Native Support
This DJ product has Virtual DJ native support, with most software controls MIDI-mapped to Rane Mixer controls. Pre-defined audio configurations are included for the Rane SL2, SL3, and SL4. Tap into the full powers of your Rane Mixer with audio, video, and DVS timecode plug & play in Virtual DJ.