Mounting glue Bison Montage Kit • 125 g Content: 125 g. Original, universal, high-quality construction adhesive based on CR rubber (chloroprene) for all types of building materials. It has excellent final strength, is elastic and is intended for use indoors and outdoors. It is not necessary to use screws or nails. Glues wood, metals, plastics, plasterboard, stone, tiles, etc. for concrete, stone, plasterboard, wood and chipboard surfaces. Not suitable for expanded polystyrene, PE and PP. Manual: Surfaces must be clean, dry, free of dust and grease. Bonding when at least one surface is absorbent (porous): apply the adhesive to one surface at points with a spacing of 20 to 30 cm as well as to corners and along the edges. Connect the parts immediately and press them firmly. Secure or support them as needed. Drying time is 24 hours. Remove wet stains immediately with acetone. Bonding of non-absorbent (non-porous) materials and method of force bonding: apply the adhesive to one bonded surface, apply to the other surface, press and then separate the bonded parts. Allow to dry for five minutes, press them together again and press firmly. Important: Use in the temperature range + 5 C to + 40 C. After use, close the container properly and store it in a dry, cool place protected from frost.