ENG-FUCHS Titan Mp Sae 80W-90 & 85W-140 and 50 similar items

MIL SPECS: Lubricants qualified under U.S. Military specification MIL-L-2105D (formerly MIL-L-2015C), MIL-PRF-2105E and SAE J2360 satisfy the requirements of the API GL-5 service designation. MP SAE 80W-90 85W-140 | AUTOMOTIVE GEAR LUBRICANT ENG-FUCHS TITAN MP SAE 80W-90 85W-140 AXLE AND GEAR AUTOMOTIVE GEAR LUBRICANT MILITARY USA NATO THIS LISTING: 65137900035 TITAN MP GEAR 80W-90 AND/OR 35LB METAL OR PLASTIC PAIL + SHIPPING, CONTINENTAL USA, EXCEPT, HAWAII, ALASKA, SAMOA, PUERTO RICO (ADDITIONAL SHIPPING COST) TITAN SUPERGEAR LS SAE 80W-90 - 20L - Fuchs - Axle Oil TITAN SUPERGEAR LS SAE 80W-90 High Performance LS (Limited Slip) hypoid gear oil for axles in commercial vehicles and passenger cars with or without limited slip differentials. LS (Limited Slip) hypoid gear oil for highly stressed normal and limited slip differentials in cars, vans, trucks, buses, tractors, construction and industrial machinery. All-season, high performance, LS hypoid gear oil. Miscible with all mineral and synthetic gear oils. No flushing is therefore required Application For all highly stressed normal and limited slip differentials in cars, vans, trucks, tractors, construction and industrial machinery. Advantages/Benefits Compatible with all elastomers and other sealing materials Lower maintenance costs. The long life characteristics of this LS hypoid gear oil reduce wear related down time No loss of performance. Protects all metals normally found in gearboxes against corrosion and does not leave deposits on oil seals Outstanding protection against wear. The lubricating film remains stable under very high loads and foaming is minimal at high speeds Quieter running. Avoids chattering and screeching even in the severest of conditions Very good viscosity temperature behaviour because it stays in grade and maintains its characteristics even in severe conditions Specifications API GL-5 / GL-5 LS API MT-1 SAE J2360 FUCHS Recommendations FORD WSP-M2C197A MACK GO-J MERITOR 0-76D MIL-PRF-2105 E ZF TE ML-07 / ML-08 OTHER PRESENTATIONS: 65137900040 TITAN MP GEAR 85W-140 ON 400LB DRUM | $1,350.00 65137900039 TITAN MP GEAR 85W-140 ON 120LB DRUM | $512.50 Description. TITAN MP GEAR LUBRICANTS are formulated to meet the service characteristics and standards designated in the API Classification GL-5. TITAN MP GEAR LUBRICANTS are manufactured from premium base oils. These fortified extreme pressure lubricants contain rust, oxidation, and corrosion inhibitors for outstanding gear protection and performance. Advantages § Compatible with other conventional Hypoid Lubricants § Reduces Corrosion, Deposits, and Sludge § Extreme Pressure/Anti-Wear Protection § Excellent Seal/Elastomer Compatibility Specifications § API Service Designations: GL-3, GL-4, GL-5 § Military Specifications: MIL?L?2105D § Mack GO-G The GL rating has noting to do with it being a mineral or synthetic oil. This has to do with EP protection. API ratings. Gearbox oils are classified by the American Petroleum Institute using GL ratings. The higher an oil's GL-rating, the more pressure can be sustained without any metal-to-metal contact taking place between transmission components. ... Friction modifiers and extreme pressure additives shall not be used. The main difference between GL 5 and GL 4 is that the GL 5 works better with Hypoid gears. API Category GL-4 designates the type of service characteristic of spiral-bevel and hypoid gears in automotive axles operated under moderate speeds and loads. These oils may be used in selected manual transmission and transaxle applications. API Category GL-5 designates the type of service characteristic of gears, particularly hypoids in automotive axles under high-speed and/or low-speed, high-torque conditions. Lubricants qualified under U.S. Military specification MIL-L-2105D (formerly MIL-L-2015C), MIL-PRF-2105E and SAE J2360 satisfy the requirements of the API GL-5 service designation.