Airbus A300 A300B4 Grandair Grand Air 1/200 and similar items

1:200 Scale Plastic Snap-Fit ? Airbus A300 ? Length:10.5" Wingspan: 9" These models from Flight Miniatures are made of plastic and don't need any glue or paints. The assembly is very basic and takes only a few minutes. Assembly consists of nothing more than attaching the wings to the fuselage and then attaching the tail and elevators. Special care has to be taken while attaching the wings since the fitting in these models is quite tight and some pressure needs to be applied. The pressure needs to be applied on the wings and onto the fuselage. Do not, for example, hold the wings from the engines and apply force like that since this will damage and/or break the engine. The level of detail is very nice and accurate. Wings will show the different panels and sections just as the real thing. The coloring and markings are not decals, so they won't peel off. For the people who are really observant, engines are accurately proportioned and the type of engine is also accurately represented. These type of models are the type which one can see in airline offices and/or at travel agents (when they were still around). These are not toys, they are not intended to be played with since they are very fragile. However, the constructions is so simple and because they have no moving parts, that casual "flying" (and making noises) will be fine, even if done by a child. Please note that this is a collector model and is not recommended for children under 8. The box measures 8 inches long by 2 inches high by 1.5 deep