JBL SA4 4Ch Amplifier for JBL Cinema and similar items

JBL SA4 4Ch Amplifier for JBL Cinema Loudspeakers 350 Watts The DSi 2.0 amplifier family, JBL?s first line of dedicated cinema amplifiers, builds on Crown DSI Digital Screen Array amplifier technology, integrating best-in-class DSP from Crown?s flagship CDi DriveCore series to deliver potent, cost-effective amplification for JBL?s entire range of cinema loudspeakers. Choose from three power configurations, available in analog and analog-plus-digital ?D? versions featuring Dante/AES67 connectivity. Deploy systems faster and easier while streamlining hardware needs: DSi 2.0 amplifiers are designed to meet power requirements of JBL cinema speakers, for a single JBL cinema solution. D-models interface with Dolby Atmos directly, without the need for additional processing hardware. JBL Cinema Speaker presets simplify configuration, optimize playback audio and protect against equipment damage. All DSi 2.0 amps feature SNMP connectivity for networked audio distribution, immersive installations and direct interfacing with third-party theater-management and cinema-control systems. Models supply 4 channels of amplification with bridgeable outputs in a single 2RU footprint, and can power up to four JBL surround speakers with a single amp channel in high-power-density 2? mode. All DSi 2.0 series amps incorporate best-in-class, 32-bit/96kHz floating-point DSP and Crown DriveCore technology, which replaces hundreds of internal components with a single processing chip for superior power density, stability and audio fidelity. Cinema managers and integrators looking to maximize their power investment and future-proof their systems can count on the JBL DSi 2.0 series to deliver robust, reliable amplification in an efficient, cost-effective package. FEATURES: Each amp offers 4 channels with bridgeable outputs to easily power JBL?s entire line of cinema speakers. Amplifiers are engineered to meet exact power requirements of JBL cinema speakers, for a single JBL cinema solution. A new amplifier design allows for high power output at 2? (SA and MA models), enabling up to 4 surround speakers to be powered by a single channel. D-models interface with Dolby Atmos directly, without the need for additional processing hardware. All models feature SNMP and ethernet connectivity for networking and third-party control; SA4-D, MA4-D and LA4-D models add Dante/AES67 connectivity. All models include a HiQ port to interface with HARMAN Audio Architect control software over a standard TCP/IQ network. Best-in-class, 96kHz/32-bit floating-point processing incorporates FIR filtering, LevelMAX? limiting, 8-channel parametric EQ, delay settings and more. Crown DriveCore technology replaces hundreds of amplifier parts with a single chip, for superior efficiency and reliability. Built-in JBL Cinema Speaker presets match all JBL cinema loudspeakers; amps are power-matched with JBL cinema speakers for optimal performance and fast system configuration. Recall presets, mute channels, monitor amplifier health and power on and off through a combined GPIO/AUX port. SNMP connectivity allows direct interfacing with third-party theater-management and cinema-control systems. An intuitive front-panel LCD and encoder interface let you configure amplifier settings at the push of a button. Ultra-quiet operation: 51dBA maximum fan noise All models are standard 19-inch (482mm) 2RU rackmount units. Weight: 23.2 pounds (10.5 kg) Frequency response: 20 Hz?20 kHz THD: 0.35% Power supply: 100?220V +/- 10%, 50/60 Hz Power connector: Standard IEC type, 320 inlet for detachable connector, 100?240V Accommodates 10AWG wire SPECIFICATIONS: Front-Panel Interface: Mute and configuration with encoder Front-Panel Display: LCD display and signal LED's (input/output) Channels: 4 CONNECTORS Analog Audio Input: Block connector Digital Audio Input (Dante/AES67): N/A Speaker Output: Barrier terminal block, accommodates 10AWG wire Network/Monitoring/Control: RJ-45 GPIO/AUX: 2in/2out block connector Power: Standard IEC POWER (1kHz, 20MS BURST, 2 CHANNELS DRIVEN, 0.5% THD MAX) Rated Power (8?): 360W x 4 Rated Power (4?): 700W x 4 Rated Power (2?): 1,050W x 4 Rated Power (8? Bridged): 1,300W x 2 Rated Power (4? Bridged): 2,200W x 2 PERFORMANCE Digital Signal Processing: 96kHz, 32-bit floating point Voltage Gain (At 4,10,16dBu Sensitivity; 4/8?): 32.5/26.5/20.5dB Frequency Response (4?, 20Hz - 20kHz): 0.5dB Total Harmonic Distortion (At full rated power, from - 30dB to full rated power): 0.35% Analog input signal to noise ratio (ref.rated power, 'A'-WTD.): 106dB Analog Input Signal To Noise Ratio (Ref. Rated Power, 20hz To 20kHz): 100dB Intermodulation Distortion (60Hz And 7kHz At 4:1, From - 30dB To Full Rated Power): 0.35dB Damping Factor (20Hz To 100Hz): 1000 Crosstalk (Below Rated Power, 20HZ ? 1kHZ): 80dB Common Mode Rejection (20Hz ? 1kHz, Typical): 70dB DC Output Offset (With Inputs Shorted): 10mV Input Impedance (Nominally Balanced, Nominally Unbalanced): 70 k? balanced, 35 k? unblanced Maximum Input Level (Low Amp Gain Mode): +21dBU Load Impedance Stereo/Dual Mode :2? ?16? Load Impedance Bridge Mono: 4? ? 16? Maximum Fan Noise (Ref. dB SPL @ 1M): 51dBA ELECTRICAL Power Supply: 100 ? 220V 10%, 50/60Hz Sleep: GPIO/AUX connector Physical Dimensions: (D x W x H) 17.21 x 18.98 x 3.46 in (437.2 x 482 x 88 mm) Net Weight: 23.15 lb (10.5 kg) Echotone Music LLC has been a professional E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for clubs, concert, and broadcast applications. Shipping -Pro packed shipped USPS, UPS or Freight Service. Contact us pay for air mail upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- Customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned without all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Avid products, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computer Cards, vacuum tubes, earbuds, raw-frame speakers, turntable cartridges, fog fluid.