sE Electronics DM1 Dynamite Active Inline and similar items

sE Electronics DM1 Dynamite Active Inline Preamplifier for Dynamic Microphone The DM1 DYNAMITE: explosive level for all your passive mics. Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier. Whether you?re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide significantly improved level to your preamp ? all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz and hum. Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards. Features +28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD designed for neutral, balanced sound quality the perfect way to boost the signal of a passive microphone gain stays consistent regardless of connected load provides significantly improved level to your mic preamp for proper gain staging SOPHISTICATED CLASS-A ELECTRONICS state of the art electronics and high-grade FETs provide supremely low noise transformerless design for pristine sound quality provides the lowest noise in its class DEDICATED OUTPUT BUFFER AMPLIFIER provides +28dB output independent of load impedance or cable length extremely low output impedance drives long cable runs and can reduce susceptibility to RF interference, buzz hum SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH efficient rejection of any electrical interference and noise high-quality finish ensures a great look for many years slim design allows for easy placement in the studio or on stage GOLD-PLATED XLR CONNECTOR for loss-free and reliable signal connection SPECIFICATIONS Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB) Gain: 28 dB (load 1kOhms) Max output level (0.5% THD): 8.3 dBV (2.6 V) Output noise level: 9 ?V (JIS-A) Powering: 48 Volts according toIEC 61938 Electrical impedance: 135 Ohms Recommended load impedance: 1k Ohms Current consumption: 3.0 mA Connectivity: 3-pin male/female XLR connector Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.) Weight: 80 g (2.82 oz.) SYSTEM REQUIREMENTS REQUIREMENTS input: passive microphone (ribbon/dynamic) output: preamp/mixer/audio interface providing 48V phantom power LIMITATIONS not suitable for phantom-powered microphones (condenser microphones, active ribbon microphones) ---------------------------------------------------------------------------------------------------------------- Echotone Music LLC is an experienced long time E-commerce Audio Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications. Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs. Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees accessories or your return may be subject to a return handling charge. Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos. Happy customers, that's music to our ears!