JBL C60PS/T-WH 8" 150 Watts Passive Pendant and 24 similar items

JBL C60PS/T-WH 8" 150 Watts Passive Pendant Subwoofer Loudspeaker ****a sealed pair of these speakers. However, this listing counts 1 as just a single speaker and you can't buy them that way. So when you order do a count of 2. You will get a sealed pair of JBL speakers. You will not get or pay for 2 pair The C60PS/T-WH pendant subwoofer loudspeaker provides bass extension and high impact for high-fidelity sound systems in a wide variety of applications including restaurants, retail stores, music cafes, health clubs, theme bars, leisure venues, and other locations where full-range high fidelity foreground/background music systems are utilized. Featuring 150 Watt power handling and low distortion, the long-excursion 200 mm (8 in) low frequency driver features butyl rubber surround for well-damped, tight sound quality and long-term reliability, and a polypropylene-coated cone for humidity protection. The high-temperature 50 mm (2 in) voice coil and low-mass fiberglass coil former ensure good bass transient response and excellent stability under high power, high duty cycle, working conditions. Features: High impact, 150 Watt direct radiating pendant subwoofer with built-in passive crossover for up to four satellite speakers. 200 mm (8 in) long-excursion driver. 8 ohm (150 Watt) and 70V/100V (100 Watt) operation. Hanging hardware with 4.5 m (15 foot) galvanized steel cable and easy to adjust clamp. Stylish design, available in white (-WH). UL listed (speaker and hanging cable system). Specifications: Frequency Range (-10dB): 42 Hz ? 350 Hz Frequency Response (3 dB): 55 Hz ? 125 Hz Power Rating: 300 Watts Continuous Program Power, 100 hrs 150 Watts Continuous Pink Noise, 100 hrs Nominal Sensitivity (2.83V/1m): 88 dB Maximum SPL (1m): 107 dB @ 1 m (3.3 ft) average, 113 dB peak Impedance: 8 ohms Transformer Taps: 110W, 55W, 30W ( 15W@70V). Set via rotary tap-selector switch (70V/100V taps along with direct 8 Transformer Insertion Loss: 0.98 dB @ 15W, 0.99 dB @ 30W, 0.94 dB @ 55W, 1.10 @ 110W Standalone Hookup: Connect to Input connector; built-in low-pass filter permanently engaged. Loop Out in parallel with Input connector (pre low-pass filter) for sending to additional speakers. Subwoofer-Satellite Hookup: For either two or four satellite speakers (not for one or three satellite speakers). With two satellite speakers, must connect to Sat 1 and Sat 2 terminals only (NC to Sat 3 and Sat 4 terminals). Satellite outputs high passed. Suggested satellite speakers include Control 62P (pendant), Control 52 (surface-mount on-wall) and Control 42C (in-ceiling). Satellite speakers to be low-Z type (8 to 16 Drivers: 200mm (8 in) polypropylene-coated paper cone with butyl rubber surround, 50 mm (2 in) high-temperature copper voice coil, vented fiberglass resin voice coil former. Enclosure Material: High impact polystyrene Grille Zinc-plated steel grille with powder-coat finish, foam backing (grille and grille backing are removable for painting) Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature UV. IP44 capability per IEC 529 ? splash-proof rating Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Input, Loop Out, Sat 1, Sat 2, Sat 3, Sat 4. Max wire 12 AWG (2.5 mm2). Rubber terminal covers included. Suspension: Two identical suspension cable systems (one as main suspension cable and the other as safety cable), each consisting of 4.5 m (15 ft) long, 2 mm (0.077 in) high-tensile galvanized-steel wire rope suspension cable with spring-clips for clipping onto the loudspeaker bracket and Gripple? brand adjustable-height cable fasteners for infinitely adjustable height. Cable has SWL rating of 45 kg (99 lb). Safety Agency: Speaker listed per UL1480 (UEAY), transformer registered per UL1876. In accordance with IEC60849/EN60849. Suspension system and Gripple- brand cable fastener listed per UL1598 and UL2239, TUV, and CSA Class 3426-01 Class 3426-81. Dimensions (H x W x D): 333 mm (13.1 in) diameter, 344 mm (13.6 in) height to top of cabinet. 369 mm (14.5 in) to top of suspension bracket. Net Weight (each): 7.6 kg (16.7 lb) Shipping Weight: 17.6 kg (38.7 lbs) per pair-packed carton Included Accessories: Two suspension cable systems (see ?suspension?, above), six removable locking 2-pin euro-block connectors, six rubber cover boots for euroblock connectors. Optional Accessories: MTC-PC60 full top panel / terminal cover. Wire access holes in plastic cover to be drilled by installer to suit the number and dimensions of wire. Colors: Available in white (-WH). Paintable. Coverage Angle: 140 conical Echotone Music LLC has been a professional E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for clubs, concert, and broadcast applications. Shipping -Pro packed shipped USPS, UPS or Freight Service. Contact us pay for air mail upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- Customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned without all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Avid products, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computer Cards, vacuum tubes, earbuds, raw-frame speakers, turntable cartridges, fog fluid.