BiAmp DP6-W D Series Two Way 6.5 Inch High and similar items

BiAmp DP6-W D Series Two Way 6.5 Inch High Output Pendant Mount Loudspeaker The DP6 is a high performance 6.5-inch pendant loudspeaker designed for open architecture spaces or any location where a stylish pendant form factor is desired. Featuring high power handling, high sensitivity and realistic sound reproduction, D SERIES pendant loudspeakers can be used in a wide variety of speech and music applications. They are equipped with a built-in autoformer, supporting low impedance or 70V/100V operation. Uniform voicing means that the DP6 can be combined with other ceiling and surface mount models in the C or D SERIES family without compromising consistency from zone to zone. The genuine coaxial design uses separate magnets for the LF and HF drivers for reduced distortion and industry-leading sensitivity, thereby permitting 3 dB to 6 dB greater output level while requiring half the amplification power of competing products. An easy-access selector switch is conveniently located on the face of the loudspeaker for selectable 8 ohm or 70V/100V operation, while an integrated rear cover hides all wiring and hanging hardware for an aesthetically pleasing installation. AMPLIFIED LOUDSPEAKER CONTROLLERS Community ALC404D is recommended for this product. Higher power ALC models may be used safely as well. FEATURES Stylish, contoured contemporary pendant design Same components and voicing as the Distributed Design ceiling and surface mount loudspeaker family Consistent, wide dispersion up to 16 kHz True coaxial loudspeakers with HF compression drivers Tru-Phase? high-frequency waveguide Patented Carbon Ring Cone Technology? High efficiency, high output, high intelligibility, low distortion Paintable enclosure constructed of high-impact ABS plastic to reduce resonances Easy-access power tap switch for selectable 8 ohm or 70V/100V operation Integrated rear cover hiding all wires and hanging hardware Weather-resistant constructed with treated drivers and twolayer powder coated grilles ETL listed to comply with UL1480 Available in standard black or white finishes Five year warranty Specifications: Loudspeaker Type: Two-way, full-range, coaxial pendant mount loudspeaker, 8 ohm or 70V/100V operation Operating Range: 65 Hz - 22 kHz Frequency Response: 80 Hz - 20 kHz (5 dB) Max Input Ratings (8 ohm): 100W continuous, 250W program 28 volts RMS, 63 volts momentary peak Transformer Taps - 70V: 60W, 30W, 15W, 7.5W and low impedance 100V: 60W, 30W, 15W Distortion - 10% Full Power: 2nd Harmonic 3rd Harmonic 500 Hz 1.74% 1.19% 2 kHz 1.18% 0.35% 8 kHz 0.77% 0.04% Sensitivity (1W/1m): 94 dB SPL (125 Hz to 12.5 kHz 1/3 octave bands) 92 dB SPL (250 Hz to 4 kHz speech range) Maximum Output: 114 dB SPL / 120 dB SPL (peak 8 ohm) Nominal Impedance: 8 ohms Minimum Impedance: 6.9 ohms @ 210 Hz Nominal Coverage: 115º conical (1 kHz to 6 kHz) 125º conical (500 Hz to 6 kHz) Axial Q / DI: 4.7 / 6.7, 500 Hz to 6 kHz Crossover Frequency: 1.2 kHz Recommended Signal Processing: 65 Hz high pass filter Drivers: LF 1 x 6.5-inch HF 1 x 1-inch exit compression driver Driver Protection: Self-resetting solid state circuit breaker Input Connection: Two 2-position Euroblock connectors Controls: Front-face wattage / low impedance selector switch Enclosure: UL 94V-0 rated ABS plastic, matte finish, paintable Finish: Black or white Mounting/Rigging Provisions: Two PHK-15 pendant hang kits (one for main suspension and one as a safety cable), each including 15ft (4.5m) long 2mm (0.77") high tensile galvanized steel wire rope suspension cables with integrated spring clips for attaching the cable to the loudspeaker bracket and Gripple? brand adjustable height cable fasteners. Grille: Powder coated steel with safety line, black or white finish, paintable Baffle: Reflex loaded UL 94V-0 rated ABS Safety Features: Included safety cable. Each cable has an SWL of 99 lbs (45 kg). Safety Agency Ratings: ETL listed to comply with UL1480 and CSA60065. Suspension system and Gripple? brand cable fastener listed per UL1598 and UL2239, TUV and CSA Class 3426-01 and Class 3426-81. Required Accessories: Electronic high pass filter Supplied Accessories: Two PHK-15 pendant hang kits Enclosure ABS plastic rear cover Rear cover ingress weather plug Optional Accessories: PHK-30 30ft (9.1m) pendant hang kit PHK-50 50ft (15.2m) pendant hang kit PSC replacement Gripple? speed clamp PST-14 trimmable 14ft (4.3m) decorative split loom tubing Dimensions - Height: 14.732 inches (374.2 mm) high enclosure Diameter: 11.22 inches (285 mm) face diameter Weight: 11.8 lbs (5.4 kg) APPLICATIONS Bars and restaurants Hotels, ballrooms and casinos Shopping malls and retail environments Health and fitness clubs Houses of worship Corporate meeting rooms Airports, convention centers and exhibit halls Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping --Pro packed shipped USPS, UPS or Freight Service. Contact us pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids