Makita 5477NB 7-1/4" Hypoid Saw and similar items

Makita 5477NB 7-1/4" Hypoid Saw -- Makita's 7-1/4-Inch Hypoid Saw, Model 5477NB, combines a powerful 15 AMP motor and Makita's efficient hypoid gears with ease-of-use features for more power, better performance and superior cuts.Hypoid Gears Deliver More Constant PowerThe 5477NB has a powerful 15 AMP motor with ball bearing construction for increased productivity. Makita's efficient hypoid gears have greater surface contact and deliver more constant power. The oil bath technology and sealed gear housing are engineered for less maintenance, with high-quality heat-treated hypoid gears for long lasting performance. The 5477NB has a large cutting capacity (2-3/8 inches at 90, 1-3/4 inches at 45, 1-9/16 inches at 50) with a maximum bevel capacity of 0-51.5 and positive stops at 45 and 51.5, ideal for truss and rafter cut-outs. The large levers are designed for fast bevel and depth adjustments. In addition, the lower guard design improves performance when making bevel and narrow cuts.Ease-of-Use FeaturesEase-of-use features were also engineered into the saw. An over-sized handle and ergonomically designed rubberized grip provide improved control and comfort. The push button spindle lock and on-board blade wrench are designed for easy blade changes. The reinforced 10-foot cord is made for job site use, with externally accessible brushes for easy replacement and extended tool life. The base plate is chemically treated to resist rust and warping for superior cuts. The 5477NB includes a Makita 7-1/4-Inch General Contractor Framing Blade with Advanced Tooth Design. The carbide tips are specifically set to withstand the harshest conditions such as plowing through nail-embedded wood. The blade is designed with special Makita heat vents strategically set to dissipate heat and increase performance. The 5477NB also includes a blade wrench attached to the saw for fast and convenient blade changing.Engineered for a Range of ApplicationsThe 5477NB is engineered for framing walls, siding, roofs and floors using a range of dimensional lumber and engineered lumber, including OSB, LVL, PSL, plywood, and more. It is ideal for framers, builders, carpenters, and general contractors seeking a best-in-class 7-1/4-Inch hypoid saw. The 5477NB is just another example of Makita's commitment to innovative technology and best-in-class engineering.About Makita's Power ToolsCut after cut, Makita saws deliver power, performance and capacity with less weight and more ease-of-use features. Makita has a full range of corded and cordless saws and blades for cutting wood, metal and masonry, including table saws, miter saws, reciprocating saws, circular saws, jig saws, metal cutting saws, plunge saws, and more, as well as a complete line of blades and accessories.About MakitaMakita is a worldwide manufacturer of industrial quality power tools and offers a wide range of industrial accessories. Makita applies leading-edge innovation to engineer power tools that are more compact and energy efficient, yet deliver industrial strength power and results. Makita U.S.A., Inc. is located in La Mirada, California, and operates an extensive distribution network located throughout the U.S. For more information, please call 800/4-MAKITA (800/462-5482) or visit makitatools.com. Makita is Best in Class Engineering.WarrantyEvery Makita tool is thoroughly inspected and tested before leaving the factory. If you are not satisfied with any Makita tool within 30 days of purchase, return it and Makita will provide a replacement or refund. Each Makita tool is warranted to be free of defects from workmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop during this one-year period, return the COMPLETE tool, freight prepaid, to one of Makita's Factory or Authorized Service Centers. Please see makitatools.com for complete details.Whats in the BoxMakita 5477NB 7-1/4-Inch Hypoid Saw, carbide tipped blade and wrench. Product Description Makita Features Efficient hypoid gears deliver more power and greater surface contact than conventional worm drive gears. Powerful 15 AMP motor for increased productivity. Oil bath technology and sealed gear housing for less maintenance. 0º - 51.5º bevel capacity with positive stops at 45º and 51.5º is ideal for truss and rafter cut-outs. High quality, heat treated hypoid gears are engineered for long lasting performance. USA SHIPPING estimates delivery times and we work to get your item to you as quickly as possible and within those times, but please know it may take slightly longer than the estimate.