Red Blinking LED light / Fake Car Alarm and 28 similar items

Blinking Red LED Light / Fake Car Alarm Indicator Flashing Light Power Supply: 12 Volts DC / very low amperage approx. 20 mA Size / Type: 5 mm / red / flashing Light Emitting Diode (LED) Mounting: Chrome bezel with nut and lock washer for mounting applications up to maximum 1/4" in depth Mounting Hole: 1/4" diameter Flash Rate: Approx. 80 flashes per minute Wire leads: Approx. 7” long Includes: 2 Car Alarm Warning Decals (2.5” x 1.5” W x H) This is an economical way to give the appearance that an alarm system is installed in your vehicle. The blinking light is particularly visible in the dark and can provide deterrence to potential thieves roaming around at night looking for a vehicle to break into. This LED requires a 12 V. positive and ground connection which may be actuated by means of a hidden switch or may be wired hot to flash continuously. This LED may be mounted on the dash of a car, truck, van, etc, or may be used as an external indicator on locking boxes for work vehicles, etc. The mere appearance of an alarm indicator light is very likely to prevent whatever you are protecting from being burglarized or vandalized. Shipping is USPS with tracking. If there is any kind of issue at all PLEASE DO NOT issue negative feedback / review, attempt to return or initiate a refund case without contacting us first and giving us a chance to make it right! Decal designs and imagery Copyright 2022 SSP LLC and may not be copied, reproduced or used in any way without our express written consent.