Yamaha R1 R1M R1S (ABS Deleted) Brake Lines and 50 similar items

Fitment: Yamaha R1 R1S R1M (ABS Deleted Only) Brake Lines Placement: Front, Rear Color: Translucent Red Important - ABS Delete: The front brake line supplied with this kit is a 3T RACE ONLY set up. The front brake line will route from master straight down fork leg to a T fitting. The right line routes down the front outside of the fork leg to the right caliper. The left line splits at the T and routes in front of the Lower triple clamp, around the outside of the left fork and down to the left caliper. R1 ABS SYSTEM MUST BE DELETED.... FOR RACE USE ONLY Important - ABS Delete: The front brake line supplied with this kit is a 3T RACE ONLY set up. The front brake line will route from master straight down fork leg to a T fitting. The right line routes down the front outside of the fork leg to the right caliper. The left line splits at the T and routes in front of the Lower triple clamp, around the outside of the left fork and down to the left caliper. R1 ABS SYSTEM MUST BE DELETED.... FOR RACE USE ONLY Years Fitment: Yamaha R1 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 Included: Core Moto Brake lines with proper lengths, banjo bend angles, mounting grommets and colours according to your model and order details Full 7 line replacement New low profile stainless shell banjo bolts with lightened heads New copper crush washers Installation and brake bleeding guide Warranty: Lifetime warranty against leaks, breaks, ruptures and any type of failure of function Features: Made in the USA Uses highest quality materials available, using only top-grade materials and construction Outperforms industry / market standards (see "testing section" below) Each line features an inner core Teflon hose wrapped tightly in a cold drawn high tinsel 32 strand stainless steel braid. Each line is coated with a flexible PVC outer shell for superior strength, corrosion resistance and abrasion protection. Color banjo fittings will not fade in the sunlight as they are not aluminum and are not color anodized. Quality is felt directly by the rider. Customizable colors, ensuring your bike has a truly unique look. DOT Certified Testing: Core Moto's Teflon core stainless steel lines can be bent 18,000,000 times before rupture compared to only 750,000 bends of the standard PTFE used by other companies. These Hoses have been batch tested to 18,000 psi without failure (normal motorcycle braking pressure is 800 - 1,000 psi). Most companies only test assemblies up to to 5,000 psi. Core Moto uses line material that out performs industry standards. Visit My Store Get Images that Make Supersized Seem Small. THE simple solution for sellers.