Biamp Community V2-8W 8" Wall Mount Speaker and similar items

Biamp Community V2-8W 8" Wall-Mount Speaker Commercial Audio The V2-8 is a two-way, full-range, 8-inch loudspeaker system suitable for use in a wide variety of fixed installations. Compact but powerful, it is ideal for distributed systems such as those found in cafés, restaurants, shopping centers and airports. When paired with a subwoofer such as the VLF208LV, a V2-8 system will produce high-fidelity, broad spectrum sound that belies its modest size.. The V2-8 is also an excellent choice for ancillary delay applications. When used to augment a front-of-house system in such venues as auditoria, theaters and houses of worship, delay loudspeakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying V2-8 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation. The V2-8 may be mounted to a wall or ceiling surface using its included yoke bracket, suspended from its M6 threaded rigging points, or installed using a third-party mounting device. It is also available with a built-in autoformer for 70/100 volt applications Key Features 8-inch compact loudspeaker, white finish 90 H x 70 V dispersion (in vertical position) Dyna-Tech driver protection circuitry Ferrofluid-treated HF driver for improved heat dissipation Carbon Ring Cone Technology provides 30% more piston area with increased excursion capability Constant-directivity rotatable square horn Terminal strip and NL4-compatible connectors Available in standard black or white finishes Mounting yoke included with 10 and 20 vertical standoffs Optional V2-8T autoformer model for 70/100 volt applications 5-year warranty Specifications Height: 17 inches (433 mm) Width: 11.3 inches (287 mm) Depth: 11.7 inches (298 mm) Weight: Including Bracket: 25.3 lbs (11.5 kg) With Autoformer: 27.3 lbs (12.5 kg) Finish: Catalyzed polyester two-part paint (white) Grille: Powder-coated steel, white finish Enclosure: Trapezoidal (22.5 included angle), 18mm 11-ply cross-laminated birch Mounting: 9 M6 threaded rigging fittings 4 M6 threaded fittings for third-party suspension products Included Accessories: Yoke-style mounting bracket Optional 10 and 20 standoffs (downward or upward tilt) Optional kits: CMKIT ceiling mount, VB-TILT tilting bracket, VB-VY8 vertical yoke, M6EYBLTKIT 6mm eyebolt Loudspeaker System: Recommended Signal Processing: 90 Hz, 24 dB/octave Butterworth high-pass filter Crossover Frequency(s): 1.3 kHz Loudspeaker Type: Compact two-way, full-range, trapezoidal, vented bass User rotatable horn Operating Mode: Operating Range: 70 Hz to 18 kHz (–10 dB) Beamwidth: Nominal –6 dB Beamwidth: 90 H 70 V (in vertical position) Sensitivity: Sensitivity (1W/1m): 92 dB (100 Hz to 12.5 kHz, free space) Drivers: LF: 1 8-inch cone HF: 1 1-inch driver Driver Protection: DYNA-TECH protection circuitry