Lewitt LCT1040 Studio Microphone with Remote and similar items

Lewitt LCT1040 Studio Microphone with Remote Tube Sound During the development process of the LCT 1040, we set out to see Grammy award-winning engineers and producers in their fantastic studios to put our prototypes to the test in real-life conditions. The additional feedback from the global audio community ranging from friendly appreciation to brutal honesty was exactly what we needed to bring this exciting project to perfection. Set the directivity with the seamless polar pattern control of the LCT 1040, giving you exactly what you were looking for. Additionally, you can also freely define the front of the mic depending on your recording scenario. To prepare you for all possible scenarios, the LCT 1040 features two XLR outputs with Neutrik connectors. The Mix output delivers the ratio set with the Circuit control, a combination of the tube and FET circuit. The FET output delivers 100% pure FET independent from the Circuit control. The high-performance magnetic pop filter of the LCT 1040 protects your capsule from unwanted plosives and moisture. Its double-layer design perfectly integrates with the shock mount and ensures clean recordings with any vocalist or genre. Features: ? Studio centerpiece - adapt to any sound source ? 4 all-analog tube characteristics - Clear, Warm, Dark, and Saturated ? Developed in close cooperation with Grammy-winning studio professionals ? Detachable remote control for unrivaled workflow ? Blendable FET circuit and seamless polar pattern control Specifications: ? Type: Condenser, externally polarized ? Acoustical operating principle: Pressure gradient transducer ? Transducer O: 25.4 mm, 1 in ? Diaphragm: 3 micron gold sputtered Mylar ? Polar pattern: Seamless from omni to wide cardioid, cardioid, supercardioid, figure-8 ? Frequency range: 20 ... 20,000 Hz ? Sensitivity: 17.2 mV/Pa, -35.3 dBV/Pa ? Self-noise: 10 dB (A) FET, 13 dB (A) tube ? Max. SPL for 0.5 % THD: 137 dBSPL, 0 dB attenuation ? Signal / noise ratio: 84 dB (A) FET, 81 dB (A) tube ? Dynamic range: 127 dB (A) ? Attenuation: 0 dB, -6 dB, -12 dB, -24 dB ? Low-cut filter: lin, 40 Hz (12 dB/oct), 80 Hz (12 dB/oct), 120 Hz (6 dB/oct) ? Internal impedance: 83.8 ? ? PSU - supply voltage: 230 V, 50 Hz, 110 V, 60 Hz ? Current consumption: 230V - 170 mA, 110V - 240 mA ? Connector PSU and remote: Gold-plated 3-pin XLR by Neutrik ? Connector: 10-pin Hirose Electric ? Tube/Valve: E88CC / 6DJ8 ? Microphone enclosure: Zinc die cast ? Microphone dimensions: 196 x 65 x 45 mm, 7.7 x 2.6 x 1.8 in ? Microphone net weight: 652 g, 23 oz ? PSU dimensions: 240 x 170 x 47 mm, 9.4 x 6.7 x 1.9 in ? PSU net weight: 2381 g, 68 oz ? Remote dimensions: 240 x 163 x 52 mm, 9.4 x 6.4 x 2 in ? Remote weight: 1952 g, 69 oz Echotone Music LLC has been a professional E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for clubs, concert, and broadcast applications. Shipping -Pro packed shipped USPS, UPS or Freight Service. Contact us pay for air mail upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- Customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned without all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Avid products, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computer Cards, vacuum tubes, earbuds, raw-frame speakers, turntable cartridges, fog fluid.