BiAmp MA60 Half Rack 60 Watts Single Channel and 50 similar items

BiAmp MA60 Half Rack 60 Watts Single Channel Compact 9.5? Mixing Amplifier The compact 9.5? MA60 mixing amplifier has an unseen intuitive user-friendly interface and groundbreaking logical rear panel. The unit comes with 1 mic/line input and 2 stereo line, mono summed inputs. On the rear you can find smart left-to-right 4 level priority system for audio routing, an emergency input, paging mic with chime and a 24VDC override output. The design of the MA60 is a true redefinition of the mixing amplifier that goes back to the basics. FEATURES: Single channel; 60 watts of continuous power Supports 4? and 70V/100V outputs Class D amplifier topology Intuitive front and rear panels Four priority levels for audio routing 24V priority output overrides local volume controls Dedicated emergency input with mute all switch Paging mic input with contact closure and chime One mic/line level input with 48V phantom power Two stereo inputs Fanless operation Internal universal power supply Auto standby mode Rack mountable (2RU) with optional accessory CE marked, UL listed, and RoHS compliant Covered by Biamp Systems? five-year warranty SPECIFICATIONS: INPUTS Number of Inputs Emergency (line level with contact): 1 Paging Mic (mic level with contact): 1 Mic/Line (balanced): 1 Stereo Line (unbalanced): 2 Input Priority Levels: 4 Priority Input Contact: Yes Chime: Yes Tone Control: Yes Wall Panel Controls: Yes Music Level Control: Yes Front Panel Indicators: Signal present, clipping, overload condition, emergency mode active, paging active, VOX active Emergency Input Nominal Input Sensitivity: 0 dBV (1 Vrms) THD+N (Pre-Out, @ -6dB): 0.5% Frequency Response (-3dB): 100 Hz ? 20 kHz Input Impedance: 5 k? Paging Mic Nominal Input Sensitivity (Bal. Mic): -45 dBV (5.6 mVrms) THD+N (Pre-Out, @ -6dB): 0.4% Frequency Response (-3dB): Balanced Mic: 165 Hz ? 20 kHz Unbalanced, Balanced Line: 20 Hz ? 20 kHz Gain: -15 to +15 dB Chime Length: 2 sec Input Impedance: 2 k? Mic Nominal Input Sensitivity: Balanced Mic: -45 dBV (5.6 mVrms) Balanced Line: -12 dBV (250 mVrms) Unbalanced Line: -12 dBV (250 mVrms) THD+N (Pre-Out, @ -6dB): 0.2% Frequency Response (-3dB): Balanced Mic: 165 Hz ? 20 kHz Unbalanced, Balanced Line: 20 Hz ? 20 kHz Phantom Power (balanced only): +48VDC (7mA/input) VOX Attenuation (Mic, Inputs 1-2): 30 dB Input Impedance: 2 k? Inputs 1-2 Nominal Input Sensitivity (Unbal. Line): -12 dBV (250 mVrms) THD+N (Pre-Out, @ -6dB): 0.1% Frequency Response (-3dB): 20 Hz ? 20 kHz Input Impedance: 10 k? OUTPUTS Number of Output Channels: 1 Output Connectors: 4-pin, 0.3 inch (7.6 mm) Euroblock 70V/100V Mode: Yes Low Impedance Mode: Yes Priority Output Contact: Yes Minimum Operational Load: 4? Amplifier Topology: Class D RMS Output Power (1% THD): 60 W Dynamic Power: 65 W SNR (1% THD): 90 dB THD+N (@ -6dB): 0.5% Protection: Temperature, overcurrent, overvoltage, undervoltage Priority Output Voltage: 24V Max Current: 0.5A Pre-Out Nominal Output Level: 0 dBV Standby Wakeup Sensitivity: Inputs 1-2: -44 dBV (6 mVrms 10%) Mic (RCA): -46 dBV (5 mVrms 10%) Mic (Balanced, VOX off): -70 dBV (0.3 mVrms 10%) Time to Auto Standby: 10 min Power Consumption (100-240VAC 50/60Hz) Normal Operation: 100W Idle Operation: 4.5W Standby Mode: 0.5W Fuse: 1.6AL Cooling: Convection Overall Dimensions Height (without feet): 3.5 inches (89 mm) Width: 8.5 inches (216 mm) Depth: 9.8 inches (250 mm) Weight: 5.7 lbs (2.6 kg) Environmental Ambient Operating Temperature Range: 32 - 95 F (0 ? 35 C) Humidity: 0-95% relative humidity (non-condensing) Altitude: 0-6,600 ft (0-2000m) MSL Compliance FCC Part 15B (USA) UL listed (USA and Canada) CE Marked (Europe) RoHS Directive (Europe) Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping --Pro packed shipped USPS, UPS or Freight Service. Contact us pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids