Ace Backstage 122SLBK Full Stage Pocket and 50 similar items

Ace Backstage 122SLBK Full Stage Pocket Standard Lid Multi Panel System The Full Stage Pocket is made of heavy duty steel and is used to conceal and protect high voltage and low voltage connections in this one dual application floor box. The slant panel configuration protects connectivity from damage and dust by placing connections upright, below the floor surface and under the solid steel lid. The Full Pocket is designed so terminated panels can be installed before or after pocket installation to support multi-phase construction applications. Features: CONNECTRIX Panels and Connectors: Designed to provide flexibility, these standard, in-stock panels and isolated connectors mate perfectly with the Full Pocket. Loaded and labeled panels can be delivered along with your Stage Pocket in one package, in less than 3 days from time of order. OPEN ACCESS Pocket Design: Engineered with a large open access panel area, connector panels can be terminated before pocket installation allowing flexibility for the installation contractor. HINGED LIDS: Lids can be removed to provide additional clearance when installing the pocket in the floor. Available in alternative lengths, for carpet installation, and to securely lock closed, Full Pocket lids can be exchanged on site as needed, or can be ordered with designated design options, for same day shipping of a customized pocket. A unique Slot Closure device rests inside the Pocket Body and can be set to close the cable exit slot when not in use. MADE STRONG: Lids and Mounting Flanges are made of 11ga CRS and are load tested to 750lbs. EASY INSTALLATION: Raised floor installation requires only a hole cutout in the floor. Consider using the Back Access Cover to provide strain relief and a conduit connection point for high and low voltage installations. UL LISTED LARGE CAPACITY: The Full Stage Pocket accommodates #PNL-100 Series Panels, #PSW-100 Series Panels, #PNL-120 Series Panels, and #PE Series Panels in an interchangeable multi-panel system making for easy custom configurations. Two (2) optional #PNL-100 Series Panels or one (1) optional #PNL-120 Series Panel will mount up to 12 "CONNECTRIX", Neutirk, and/or Switchcraft type connectors. Two (2) optional #PSW-100 Series Panels will mount up to 12 Switchcraft type connectors. DURABLE CONSTRUCTION: Welded steel construction of Full Stage Pocket Lid, Mounting Flange, and Pocket Body resist bending under even the most severe stage loads. The Lid and Mounting Flange is made from 1/8" (nominally 11 ga. (.120") CRS) thick steel while the Pocket Body is made from 16 ga. (.062") thick CRS steel. SPRING LOADED HINGE PINS: Removable spring-loaded hinge pins permit easy exchange of lids for Carpet Lid (CL), Locking Lid (LL), Standard Lid (SL) and custom application lids. CABLE WAY SLOTS: Generous 3/8" x 8" Cable Way Slots permit easy cable exit from pocket(s), even for large gauge cables. A Cable Way Slot Closure channel closes the slot when not in use. EASY INSTALLATION: Easy installation into 8.5" x 8.5" square cutout in stage floor. Open easy access from the top or back of the stage pocket allows simple connector/panel terminations. DECORATOR FINISHES: Scratch/wear resistant finish, oven cured powder coat electro-static applied inside and outside entire Full Stage Pocket. Decorator neutral Antique Copper Vein and Textured Black finishes are standard. A Solid Brass Lid and Mounting Flange as well as Solid Stainless-Steel Lid and Mounting Flange with brushed finishes are also available by special order. RUBBER LID STOPS: Rubber lid stops set into recessed mount cradle the lid to prevent lid rattle. Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping -Pro packed shipped USPS, UPS or Freight Service. Contact us pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - International Sales Clearance items, Custom Builds, Road Cases, DT12 items, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, turntable cartridges, fog fluid