4x4 Winch Hook Pull Strap 10 inch Red Nylon and similar items

This is the toughest winch hook pull strap I have. This heavy duty nylon strap is even beefier than the extra heavy duty polypropylene straps that I make. This heavy duty Nylon strap is approximately 10 inches in length with a loop at each end, a small loop to attach to your hook and a larger loop to fit you hand. The hole is large enough for a gloved hand. Tensile strength (average breaking strength under good conditions) of the strap material is 6100 pounds. The stitching has not been tested to that load and it is very important you understand this strap is not intended for towing or lifting. This is a strong strap but it is not intended or suitable for connecting your winch hook to a load or for pulling a load. This strap is to be used only to pull your winch hook and cable from the winch drum. The strap is not designed or intended for any other use. You will not find a tougher winch hook pull strap anywhere. If you think this strap is to heavy duty for your needs you can take a look at the other straps I produce. I'm sure I have one to fit your needs. If you just want a strap that looks nice for minimum cash then my heavy duty polypropylene strap at $5.00 is the one for you. You can check my other items for other sizes and configurations of winch hook pull straps. Use for any other purpose at your own risk. Made in my shop in LA (Lower Alabama) from new materials.