Completely Adjustable 2" to 31". Accepts any clasp, buckel, hook, snaps. Lightweight Aluminum with powdercoat finish. Making something short? Just use one track section for up to 15". Easy Quick assembly. Can be mounted with suction cup or permanently. Can be used to make paracord items up to 31" such as bracelets, belts, slings, straps, more! Ruler right on the track surface. Our newest 2018 Design. Acid Tactical 31” Paracord jig - Revision 2018 Our 31” paracord jig can be used to produce a huge variety of paracord items. The towers were designed to hold different sized clasps, hooks, snaps, more. The jig itself is made of aircraft grade aluminum with a powder coated finish. There is a tape ruler attached to both sections and foam pad on each end. You can use a single section to make items up to 15”. With both tracks connected you can make items up to 31” The 31” jig is mainly comprised of two 16” tracks and two adjustable towers. The tracks slide into each other and are secured using a bolt and wing nut. The towers slide into the tracks on each end once the two tracks are secured together. The towers can be tightened down to the track depending on your needs. The very top of the towers were designed for clasps from small 1” to over 2”. The hole cutouts can be used for hooks and snaps. There’s also a horizontal threaded rod that can be used for a variety of paracord hardware. The jig can be secured to a flat clean surface using the supplied suction cups and wing nuts. We also include two screws if you desire to secure it permanently to a work bench. Be mindful that you may need to slide both towers to acquire the correct length for your project. This will mean you may not always start at the 1” line. Be sure to measure with your own measuring tape or ruler. You may also need to secure the towers at your required length before securing to the suction cups. Once the suction cups are secured you will not be able to slide the towers past the wing nuts securing the suction cups. We have been making and selling jigs for 5 years. Over the years we have made many revisions. With our 2018 revisions we have designed a whole new jig. We hope that it can make paracording in bulk faster and more productive. Feel free to download the full description and Assembly guide PDF files below. Jig31Description.pdf Jig31Assembly.pdf Acid Tactical LLC Inman, SC 29349