8 x 60lb 630cc fit Deka Long Fuel Injectors FI114191 108191 EV6/USCAR High Impedance 60mm Details: Manufacturer Part Number: FI114191 / 108-191 (108191) Manufactured with precision to meet OE standards; Easy installation The fuel injector has been 100% tested and exactly match the internal coil resistance and fuel flow rate of OEM fuel injector Static Flow Rate @ 43.5PSI ( 300kPa ) w/Gas: 60 lb/hr = 630 cc/min = 453 g/min Static Flow Rate @ 87PSI ( 600kPa ) w/Gas: 85.7 lb/hr = 900 cc/min = 648 g/min Quantity: 8 pieces Condition: New 4-hole nozzle Specifications: Long size fuel injector Connector: EV6 USCAR Coil Resistance: 12.5 Ohms / High Impedance / High-Z (No ECM driver modifications required) Gain: 0.11ms/mg Offset: 0.055ms Turn on time @ 14VDC: 1.14ms Turn off time: 0.85ms @ 600KPa Series: fit DEKA 4 ( DEKA IV ) Orifice Type: Multi-orifice Spray Pattern: 30 Degree Spray Cone Factory fitted with Viton upper and lower o-rings Low Impedance performance characteristics with High Impedance Compatibility Fitment details: Overall Length: 74 mm Oring to Oring Length: 60 mm Diameter: 16 mm Orings: Top and bottom 14,5 mm Dimensions, other than the connector, are identical to the FI114961 EV1 Siemens Deka IV Long Injector. Application/Compatibility: Despite the high flow rate, they are linear and controllable at low pulse widths and have been used in ULEV applications! This allows you to use a larger injector than normally possible without hurting idle and low speed driveability. Adding to the flexibility of application, these units are high-impedance; making them compatible with most ECUs, while delivering the most flow available in a High-Impedance injector. These injectors are able to function at high fuel pressures and don?t exhibit the high fuel pressure handling problems found with many other high flow high-impedance injectors. This makes these injectors very well suited to turbocharged and supercharged applications that see high fuel system pressures. The EV6 / USCAR injector connector can be found on many late-model GM (LS2, LS3, LS7), Dodge (Hemi), Ford (Modular) and select import motors. These are the correct injectors for all 60mm applications.