Audi S5 Logo Brake Caliper Decals / Stickers Kit 6x decals per kit approx. 2x 71x25mm 2x 63x20mm 2x 55x17mm Made from Superior Quality High Temperature Cast Vinyl Supplied in 2 colour parts If you would like a kit with the 'BREMBO' logo instead, Please buy from this listing and send an email to confirm 'BREMBO' Self Adhesive, Easy to Fit, No Mess !! Available in 4 Colours Black + Red White + Red Silver(Met) + Red Dark Grey(Met) + Red Benefits of Superior Cast Vinyl Lifespan 8 - 12 years Shrinks No (never) Superior Adhesive Yes Thinner Yes More Durable Yes Heat Resistant Yes Weather Resistant Yes Stronger Colours Yes Remember! If it's not Cast, it's not Quality! Fitting Instructions Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease. Cut the sheet into individual logos. ( Not individual letters ) Place a decal face down, rub all over, then peel off the backing ( squared paper ). Position the decal in the desired location then rub firmly all over. If the surface you are applying to is cold, heat with a hairdryer, then rub all over again. Peel off the application paper with care. If there are any air bubbles simply prick with a needle and push the air out. Repeat with the red parts which are fitted with clear application tape to aid alignment. DO NOT wash for at least 24 hours to allow the adhesive to cure.