Audio Technica ES933PMWH Hypercardioid Condenser Hanging/Ceiling Microphone The ES933 condenser hanging microphone is designed for quality sound reinforcement, professional recording, television, and other demanding sound pickup applications. Its low-profile design and excellent response make it ideally suited for suspending over choirs, instrumental groups and theater stages. The microphone is equipped with a 15.2 m (50') permanently attached miniature cable, terminated with a TA3F-type connector that attaches to compatible Audio-Technica power modules. UniGuard RFI-shielding technology protects the microphone from radio frequency interference (RFI). The microphone comes with a two-stage foam windscreen and vinyl-coated steel hanger. Additional interchangeable elements ? omnidirectional (360), cardioid (120), hypercardioid (100), and MicroLine (90) ? are available separately. ES933PMWH: hypercardioid polar pattern (100 acceptance angle); AT8534 wall/ceiling plate power module (+10 dB gain switch, 80 Hz high-pass UniSteep filter); low-reflectance white finish. Features: Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications Small size and excellent response are ideal for suspension over choirs, instrumental groups and theater stages Available interchangeable elements permit angle of acceptance from 90º to 360º Superior off-axis rejection for maximum gain before feedback Requires 11V to 52V DC phantom UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI) Integral UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality Specifications: Microphones Element: Fixed-charge back plate, permanently polarized condenser Frequency Response: 30-20,000 Hz Low Frequency Roll Off: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 109 dB, 1 kHz at Max SPL Signal-to-Noise Ratio: 65 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 2 mA typical Switches: Flat, roll-off Weight (Microphone): 5.5 g (0.2 oz) Weight (Power Module): 81 g (2.9 oz) Cable: 15.2 m (50') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable, terminated with TA3F-type connector Dimensions (Power Module): 92.9 mm (3.66") long, 18.9 mm (0.74") diameter Dimensions (Microphone): 27.5 mm (1.08") long, 8.4 mm (0.33") head diameter Output Connector (Power Module): Integral 3-pin XLRM-type Optional Interchangeable Elements: ESE-O omnidirectional (360), ESE-H hypercardioid (100), ESE-ML MicroLine (90) Accessories Included: AT8109 two-stage foam windscreen, AT8452 steel hanger Audio-Technica Case Style: M25 Echotone Music LLC is an experienced E-commerce Audio Visual Equipment dealer since 1998. We take pride in selling Pro Audio gear for musicians, sound engineers, production companies and broadcast applications. Shipping --Pro packed shipped USPS, UPS or Freight Service. Contact us pay for 2 day air upgrade on any unit. We are working hard to get your product ( built if needed), processed shipped. Processing times vary, 2-30 days Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided. Otherwise customer pays for return shipping. Returned items must be sealed/unopened to qualify for a full refund. Refunds are for the Item cost only. Gear returned with out all its original packaging, accessories or shows signs of wear, is subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. What products can not be returned? - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, computers, vacuum tubes, earbuds, harmonicas raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids