BMW M Logo Brake Caliper Decals / Stickers 6x decals per kit approx. 2x 60x21mm 2x 50x17mm 2x 40x14mm Made from Superior Quality High Temperature Cast Vinyl If you would like a kit with the 'BREMBO' logo instead, Please buy from this listing and send an email to confirm 'BREMBO' Self Adhesive, Easy to Fit, No Mess !! Available in 5 Colours Black White Red Silver(Met) Dark Grey(Met) Benefits of Superior Cast Vinyl Lifespan 8 - 12 years Shrinks No (never) Superior Adhesive Yes Thinner Yes More Durable Yes Heat Resistant Yes Weather Resistant Yes Stronger Colours Yes Remember! If it's not Cast, it's not Quality! Fitting Instructions Thoroughly clean and degrease the surface. Use Methylated Spirit or Isopropyl Alcohol to degrease. Cut the sheet into individual logos. ( Not individual letters ) Place a decal face down, rub all over, then peel off the backing ( squared paper ). Position the decal in the desired location then rub firmly all over. If the surface you are applying to is cold, heat with a hairdryer, then rub all over again. Peel off the application paper with care. If there are any air bubbles simply prick with a needle and push the air out. DO NOT wash for at least 24 hours to allow the adhesive to cure.