Mini Heater for 3D Resin Printer, AUERVO Lightweight 3D Printer Thermostat Temperature Controller Heating Cooling Temp Control for LCD DLP 3D Printer About this item ?Compact, Special For 3D Printers? AUERVO Mini Heater, with a compact body of 57x32x108mm/2.24x1.26x4.25in, 117grams, It can be placed anywhere on the 3D printer at your willing, It helps you to heat up the resin and rise keep the ambient temperature. Make your 3D printer work well, save your time and resin. ?Quick And Easy Operation?Easy and safe to use. Just plug the temperature controller into the socket, then place it into the 3D pirnter, set the ambient temperature ,Press the "+"for a higher temperature or ?-" for a lower temperature. leave it for a few seconds and it reverts back to ambient temperature, temperature control set range: 10?(50?)-50?(122?). Working temperature range: -20?(-4?) to 50?(122?). ?Why do we need it??As we know most resin normal use environmental temperature is 20 ~ 30 degrees. Once the temperature is lower, the return speed will slow down, resulting in failed printing. our temperature controller, It is specially used to solve the problem of deformation, not sticking to the bed, Layer adhesion ,warming and so on during the printing process of the 3D printer due to lower temperature ?Safty design?Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ?. Fireproof case, high-quality power cord, all professionally designed for your safe printing. Setting the temperature are clear and easy, We only need to press "+" for a higher temperature or "- "for a lower temperature then leave it for a few seconds and it reverts back to ambient temperature if required. ?More features?3D printer temperature controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set temperature, start heating; when the temperature reaches the set temperature, start fan circulation. ?Widely used?It is suitable for most 8 inches and less than 15inches DLP, LCD 3D printers, Some 6 inch printers can also be installed. prefect for most brand resin printer,such as Creality,Anycubic,ELEGOO,Frozen. Product Description Why you need a heater for your Resin 3D printer in winter? Most resins have an ideal printing temperature is about 25?(77?). If the temperature falls below this, the resin can become viscous, resulting in reduced print quality and even print failure. So we designed this small heater for resin printers. to help you can expect better printing results! Of course, you can DIY a heater yourself, but this may have safety problems. Our Professional design heaters are built for reliability and safety. It's can 24/7 running. How to install: 1.Put the heater to the left of 3D printer Z-axis, please do not block the way of Z-axis. 2.Make the power cable (5mm) come through the printer tank. 3.Remove the bottom tape, paste and fix it on the left side of the Z-axis of the printer. How to use: 1. Setting a target temperature(25?~30?). 2. Wating temperature rise to target temperature and waiting resin get warm. 3. Start to printing.