Panasonic HG-C1050 Laser Displacement Sensor Item Performance characteristics Applicable Standard EMC Directive Compliance, FDA Standard Measurement Center Distance 50mm 1.969 in Measuring Range 15mm 0.591 in Repeatability 30 ?m 1.181 mil Linearity 0.1%F.S. Temperature Characteristics 0.03% F.S. /? Light Source Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note) Max. output: 1mW emission peak wavelength: 655nm 0.026 mil (Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). Beam Diameter ø70 ?m 1.1811 mil approx. (Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. Supply Voltage 12 to 24V DCplus or minus 10% Ripple P-P 10% Current Consumption 40 mA or less (at 24V DC supply voltage) 65 mA or less (at 12V DC supply voltage) Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ? 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) Control Output NPN open-collector transistor - Maximum sink current: 50mA - Applied voltage: 30V DC or less (Between control output to 0V) - Residual voltage: 1.5V or less (At 50mA sink current) - Leakage current: 0.1 mA or less Control Output: Output Operation Either Light-ON or Dark-ON Control Output: Short-Circuit Protection Incorporated (Auto reset type) Analogue Output: Analog Voltage Output • Output range: 0 to 5 V (at alarm: +5.2 V) • Output impedance: 100? Analogue Output: Analog Current Output • Output range: 4 to 20mA (at alarm: 0mA) • Output impedance: 300? or less Note : Analog current output has been added from shipment in August 2016. Response Time Switchable between 1.5 ms / 5 ms / 10 ms External Input NPN non-contact input - Input conditions Invalid: +8 to +V DC or Open Valid: 0 to +1.2V DC - Input impedance: 10k? approx. Pollution Degree 2 Operating Altitude 2,000 m 6561.680 ft or less Protection IP67 (IEC) Ambient Temperature -10 to +45 ? -14 to 113 ? (No dew condensation or icing allowed), Storage: -20 to +60 ? -4 to 140 ? Ambient Humidity 35 to 85% RH, Storage: 35 to 85% RH Ambient Illuminance Incandescent light: 3,000 ?x or less at the light-receiving face Vibration Resistance 10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each Shock Resistance 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Cable 5-core composite cable, 2 m 6.5617 ft long Cable Extension Extension up to total 10 m 393.701 ft is possible with 0.3 mm2, or more, cable. Material Enclosure: Aluminum die-cast Front cover: Acrylic Weight (Typ.) Net weight: 35 g approx. (without cable), 85 g approx. (including cable) Regulatory Compliance and Certification CE Marking (EMC Directive, RoHS Directive), FDA Regulations, UL/c-UL Certification (Note) : The UL/c-UL certified products have been shipped since April, 2017. New One Year Warranty