Non-Retractable Fixed-Point Shoulder Belt with Quick Disconnect SKU: FE200865 Length: 63? The Quick Disconnect Shoulder Belt can be mounted to the existing original equipment shoulder belt anchor bolt. This allows it to be used along with the original equipment shoulder belt. The Quick Disconnect Shoulder Belt can be easily removed, by using the single push-button buckle, allowing a passenger sitting on the flip seat to use the original equipment shoulder belt. When a wheelchair is placed in the same area, the Quick Disconnect Shoulder Belt connects to its short anchor strap by using the single push-button buckle. Sure-Lok Occupant Restraint Systems provide a wide range of options, allowing you to select the products that are best suited for the needs of each user and the layout of each vehicle. The 3 styles of Occupant Restraints: Lap Belts, Shoulder Belts, or Integrated Combination Belts. Occupant Restraints, when properly used with a complete Sure-Lok System (comprised of wheelchair tie-downs, a complete occupant restraint system, including lap and shoulder belt), track and anchorages are designed to meet the following requirements where applicable: 30mph/20g Impact Test Criteria per SAE J2249 30mph/20g Impact Test Criteria per Canadian Z605 Standard 30mph/20g Impact Test Criteria per National Standards for School Buses 49 CFR Part 38 Americans with Disabilities Act (ADA) 49 CFR Part 571.222 (FMVSS 222) School Bus Passenger Seating and Crash Protection FMVSS 302 Flammability Test Certificates of Conformance available upon request WARNING: Occupant Restraints are not wheelchair securements. Always secure the occupant in the vehicle with a complete Sure-Lok Occupant Restraint System, consisting of lap and shoulder belts.