Panasonic HG-C1030-P Laser Displacement Sensor HG-C1030-P pplicable regulations and certifications CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), FDA Regulations, UL/c-UL Certification (Note) : The UL/c-UL certified products have been shipped since April, 2017. Measurement center distance 30mm 1.181 in Measuring range 5mm 0.197 in Repeatability 10 ?m 0.394 mil Linearity 0.1%F.S. Temprerature characteristics 0.03% F.S. /? Light source Red semiconductor laser Class 2 (JIS / IEC / GB) / Class II (FDA)(Note) Max. output: 1mW emission peak wavelength: 655nm 0.026 mil (Note) This product complies with 21 CFR 1040.10 and 1040.11 Laser Notice No. 50, dated June 24, 2007, issued by CDRH (Center for Devices and Radiological Health) under the FDA (Food and Drug Administration). Beam diameter ø50 ?m 1.969 mil approx. (Note) This is the size in the measurement center distance. These values were defined by using 1 / e2 (13.5% approx.) of the center light intensity. Due to leak light outside the specified area, the reflectance around the detecting point may be higher than at the point and this may affect the measurement value. Supply voltage 12 to 24V DCplus or minus 10% Ripple P-P 10% Current consumption 40 mA or less (at 24V DC supply voltage) 65 mA or less (at 12V DC supply voltage) Note : Specifications have been changed from shipment in August, 2016. For shipment before July 2016 ? 40 mA or less (at 24 V DC supply voltage), 60 mA or less (at 12 V DC supply voltage) Control output PNP open-collector transistor - Maximum source current: 50mA - Applied voltage: 30V DC or less (Between control output to +V) - Residual voltage: 1.5V or less (At 50mA source current) - Leakage current: 0.1 mA or less New One Year Warranty