Turn our spy cam into a super security system. Mount your camera on to Robo-Scan. Then attach Robo-Scan to a tripod or wall and now you can scan back and forth and up and down, up to 240! Can be set on auto or manual. Now you won't be stuck looking in only one direction. With your camera mounted on Robo-Scan, you will now be able to see and record much more area. How It Works With the included remote control you can tell your camera where to look, both up and down and side to side. You can even preset four of your favorite positions. Set it on auto scan so when you are away the camera will automatically scan just like those expensive security cameras. How To Use -Have the camera follow your kids around as they play, as the kids move use the remote control to have the camera keep an eye on them. Scan from one room to the other to monitor several areas -Use as a security camera to record in several areas, set for auto-scan and scan 4 preset areas, great for when you arn't home but want to record many different areas. It's Easy Place the Robo-Scan base on a table or platform, connect the base to a TriPod, or mount the Robo-Scan to any wall using the included wall mount. Attach any XCam2 Video Camera to the Robo-Scan Base, then view all the action on any TV/VCR! Then using the ScanPad Remote control up/down and left/right as you scan all the action! The motor is extremely quiet, unnoticeable to people in the room! Record Only the Action! The new Pan 'n Tilt works great when used with the VCR Commander. Once motion is detected you can have your VCR turn on and start recording. Then using the Robo-Scan, your camera can sweep between 4 preset locations to record all the action in the area. You'll be sure to catch ALL the action! What You Get 1 Pan 'n Tilt Base 1 Wall Mount 1 FREE ScanPad Remote - $50 Value! 1 Addressable Power Supply 5 mounting screws for Wall Mount