Product Information: Nozzle structure: integrated structure, no internal parts. Spraying mode: hollow cone Pressure range: 1 to 4 bar (20 to 127 l/min). Thread sizes: 1/4 ", 3/8 ", 1/2 ", 3/4 "BSPT Material: Plastic Features: A liquid mixing breeder is used for stirring or mixing liquids stored in a tank, drilling or listening. The hybrid teacher uses a unique Venturi design that enables a small pump to circulate a large number of tank solutions. Designed according to Bernoulli theory, liquid is pumped into the nozzle by opening a large flow rate under pressure. Designed according to Bernoulli theory, liquid is pumped into the nozzle by opening a large flow rate under pressure. As the liquid flows out of the nozzle at high speed, it passes through the nozzle's "flow through" chamber to paint around the solution, designed to eliminate the build-up of material inside. The additional liquid flow is mixed with the pumping solution, meaning that for every gallon the nozzle pumps through the nozzle, it can pull four gallons of surrounding solution. Tank lamination - tank blend oil - cleaning tank - coating tank - electrophoresis tank - fertilizer tank - pulp tank - sludge tank - Paint booth - tank anodizing - cooling tower - decoration To use: 1. Paint cans 2. Fertilizer tank 3. Paint mixing tank 4. Mix the tank 5. Anodic oxidation of pulp cans 6. Clean the storage tank 7. The cooling tower 8. One-way fall 9. Decorate the fountain 10. Keep solids suspended 11. Color exchange facility 12.C.L.P. tanks for various mixed liquids and excitations. Packing list: Nozzle X1PC