Symetrix PRISM 8X8 Digital Signal Processor w/Dante Channel for Audio Networking Ships Free! Flexible IO Combinations. The prism family scales from the smallest 44 to the largest 1616, providing the perfect amount of class leading Symetrix quality IO for any installation. Dante in Our DNA. Prism DSPs are equipped with optional factory installed 128 (6464) Dante channels. The Dante protocol enables ultra-reliable multi-channel audio networking over IP. Together, Symetrix and Dante provide the fastest possible way to implement, control, and maintain a system of networked DSPs and accessories ? including third party Dante-enabled microphones, loudspeakers, power amps, and mixing consoles. Models without Dante provide even more accessible DSP pricing for smaller systems. Scaling Up. A Prism system?s analog input and output count may be increased using Symetrix Dante-enabled xIn 4, xIO 44, xOut 4, xIn 12, and xOut 12 analog I/O expanders. Unlimited Programming Flexibility. Prism is programmed using Composer ? Symetrix? award winning open-architecture CAD application. Unique to Composer is the ability to natively configure Symetrix and select third party Control Made Easy. Multiple control options include low-cost Symetrix ARC wall panels and an easy to generate SymVue Windows virtual GUI. The human readable Composer Control Protocol supports programming of third-party touch screens and control devices. An Embedded Web Server for Status and Even More Control. Prism?s embedded web server displays I/O levels, diagnostics data, and hosts ARC-WEB ? a browser-based interface for smart phones, tablets, and computers. Form, Fit and Function. Prism 88 have been designed using standard 19? x 1U enclosures. For convenient point-of-use or rack mounting. Specifications Analog Inputs Number of Inputs: Four (4) switchable balanced mic or line level. Connectors: 3.81 mm terminal blocks. Nominal Input Level: +4 dBu. Maximum Input Level: +23 dBu. Mic Pre-amp gain: 0, 12, 24, 44 or 54 dB switchable with 24 dB trim. Mic Pre-amp EIN: -125dB with 150 ohm source impedance. 22.4 kHz BW. CMRR: 79 dB 1 kHz, unity gain. Input impedance: 8k Ohms balanced, 4k Ohms unbalanced. Phantom power (per input): +48 VDC, 10 mA maximum. Dynamic range: 113 dB, A-weighted. THD+Noise: -100 dB; 22.4 kHz BW, unweighted; 1 kHz +15 dBu with 0 dB gain. Course gain is set to +4dBu. A to D Latency: 0.28 mS. Analog Outputs Number of Outputs: Four (4) balanced line level. Connectors: 3.81 mm terminal blocks. Nominal Output Level: +4 dBu with 20 dB of headroom. Maximum Output Level: +24 dBu (+22.8 dBu into a 2k Ohm minimum load). Output Impedance: 300 Ohms balanced, 150 Ohms unbalanced. Dynamic Range: 117 dB, A-weighted. THD+Noise: -97 dB; 22.4 kHz BW, unweighted; 1 kHz, 0 dB gain +8dBu output. D to A Latency: 0.60 mS. System Sampling Rate: 48 kHz. Frequency Response (A/D/A): 20 Hz ? 20 kHz, 0.5 dB. Dynamic Range (A/D/A): 113 dB, A-weighted. Channel Separation (A/D/A): 110 dB 1 kHz, +24 dBu. THD+Noise: -95 dB (22.4 kHz BW, un-weighted); 1 kHz +15 dBu with 0 dB gain. Latency (A/D/A): 1.04 mS, inputs routed to outputs. Processors: 1 x Analog Devices SHARC 21489 400 MHz SIMD. Raw Processing Capacity: 400 MIPS, 1.6 GFLOPS. Delay Memory: 174 mono seconds. Analog control inputs: 0-3.3 VDC. Recommended External Control Potentiometer: 10k Ohm, linear. Logic Outputs: Low (0V) when active, pulled high (5V) when inactive. Logic Output Maximum External Power Supply Voltage: 24 VDC. Logic Output Maximum External Power Supply Current Sinking: 50 mA. Logic Output Maximum Output Current: 10 mA. RS-485 Serial I/O: 38.4 kbaud (default) 8 data bits, 1 stop bit, no parity, no flow control. May be broken out of ARC port. Ethernet Cable: Standard CAT5e or CAT6, maximum device-to-device length = 100 meters. Dante Cable: Standard CAT6, maximum device-to-device length = 100 meters. ARC Cable: Standard CAT5, distance dependent upon load and number of devices. 8 Watts maximum power available. Maximum Devices Per System: 80 units per Site File. Maximum Stored Presets: 1000. ---------------------------------------------------------------------------------------------------------------- Echotone Music LLC is an experienced long time E-commerce Audio Musical instrument dealer since 1998. We take pride in selling quality gear for musicians, sound engineers, production companies and broadcast applications. Shipping --Items are well packed and shipped USPS, UPS or Pallet Freight Service. Items purchased on Friday may not ship until Monday or until the projected processing period. We are working hard to get your unit Built ( if needed), processed and shipped. Returns/Refunds- If there is truly a manufacturing defect a return tag will be provided, otherwise customer pays for return shipping costs. Returned items must be sealed/unopened in original, brand-new condition, showing no signs of wear or use such as mount marks, plug marks, scratches, scuffs, dings or scrapes, screw mount marks or collateral material damage.. Items must also include all original packaging, manuals, warrantees accessories or your return may be subject to a return handling charge. Refunds or for the Item cost only. If the item was listed as free shipping then the cost of the shipment will be deducted from the units original cost. Gear returned with out all its original packaging, warranty cards and accessories or that shows signs of wear from use, will be subject to an additional service fee. This item is now used and it would be unfair to resell to another customer as new. The following products cannot be returned - Clearance items, Custom Builds, items identified as non-returnable, discontinued items, used or NOS items, electronic software downloads, demo gear, strings, reeds, computers, tubes, earbuds, earplugs, recorders, harmonicas, raw-frame speakers, drumheads, drumsticks, turntable cartridges, fog fluids, clothing/footwear, cleaners, polishes polishing cloths, software/soundware, books, CDs, DVD's, vinyl records, and videos. Happy customers, that's music to our ears!