Brand NEW! Including 90 Days USA Factory Warranty. Designed for studio and stage use, the Tascam SERIES 8p Dyna is a 1 RU rackmountable mic preamp with selectable analog compression on each channel, as well as low-noise preamps, dual S/MUX optical ports, and selectable +48V phantom power on a per-channel basis. Because of this, you can use the unit as an expansion device for S/MUX equipped interfaces, as a front-end for DANTE setups, or as a standalone front end. On the front of the unit, you'll find two combination XLR-1/4" input jacks for mic, line, or instrument usage. The rear provides six more XLR-1/4" combination jacks for line or microphone inputs. You'll also find eight 1/4" line outputs and a DB25 connector for all eight analog outputs. BNC wordclock I/O and optical ports are found on the rear as well. The front panel offers individually switched 48V phantom power as well as comprehensive metering via digital peak and level meters. The unit ships with its own power supply. Features at a Glance 8 HDIA (High Definition Instrumentation Architecture) microphone preamplifiers Single-knob analog compressor with true bypass, individually assignable to each input channel 2 front-panel instrument (Hi-Z)-microphone combo inputs 6 rear-panel balanced mic/line inputs Individually switched +48V phantom power per channel Dual S/MUX optical outputs: 8 channels at up to 96 kHz; 4 channels at 176.4 or 192 kHz (ADAT compatible) 8 line-level 1/4-inch balanced TRS analog channel outputs 8 line-level balanced channel outputs on a 25-pin D-Sub connector Wordclock in and out on BNC connectors, with In/Out/Thru switch Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars Rugged metal 1U rackmount enclosure Versatile Inputs With two instrument/microphone combo inputs on the front panel, you can quickly plug in mics, guitars, basses, and more. Six balanced mic/line inputs grace the rear. Every microphone input has individually switchable +48V phantom power, allowing you to operate condenser mics and ribbon mics safely at the same time. Thus, the unit gives you a multipurpose front end for recording and live sound. Expand Your Existing Interface Dual S/MUX optical outputs on the rear of the unit enable you to use it as a front end expander for S/MUX-equipped audio interfaces such as TASCAM SERIES 102i and SERIES 208i and Celesonic US-20x20. ADAT compatibility is also available. With two S/MUX outputs, you can send all eight SERIES 8p Dyna channels at up to 96 kHz (four channels at 176.4 or 192 kHz), expanding your existing system's capabilities in the process. Send to Anything The SERIES 8p Dyna's eight line-level analog channel outputs are provided on both 1/4-inch balanced TRS connectors and as a balanced 25-pin D-sub connector. Route signals to interfaces, recording mixers, front-of-house consoles, and pretty much anything else. Connect its D-sub outputs to a TASCAM ML-16D or ML-32D Analog Dante converter, and the SERIES 8p Dyna becomes a pristine front end for an audio-over-IP network. Pro Features You'll note the rugged metal 1 RU rackmount enclosure, perfectly suited to live use. Wordclock I/O on BNC connectors with an In/Out/Thru switch enable proper synchronization of digital signals. Front-panel analog overload indicators, compression indicators, and digital peak and level meter bars let you monitor the unit's performance. Still, the SERIES 8p Dyna is simple to operate, so you can stay focused on the task at hand. Tascam SERIES 8P DYNA Digital Specifications Sampling Frequency 44.1, 48, 88.2, 96, 176.4, and 192 kHz Bit Rate 24-Bit Inputs Input Connections 8 x XLR-1/4" Combination Jacks Input Impedance Mic Input: 2.3 Kilohms Instrument Input: 1 Megohm or More Line Input: 10 Kilohms Input Gain Mic: -58 dBu (Minimum), -6 dBu (Maximum) Instrument: -58 dBV (Minimum), -6 dBV (Maximum) Line: -48 dBu (Minimum), +4 dBu (Maximum) Gain Range 52 dB Maximum Input Level Mic: +10 dBu Instrument: +10 dBV Line: -+24 dBu Outputs Output Connections 8 x 1/4" TRS Line Outputs, Balanced 1 x DB25 Connector Output Impedance Analog Output: 100 Ohms or Less Line Output: 230 Ohms or Less Load Impedance: 2 kOhms or More Output Level Nominal: +4 dBu Maximum +20 dBu Digital Audio Connectors Optical I/O, Multichannel Optical Format, Supports S/MUX2 at 88.2 and 96 kHz, S/MUX4 at 176.4 and 192 kHz Clock Word Clock I/O I/O: 2 x BNC Sockets Voltage Clock Input: 2.0 to 5.0 V p-p Clock Output: 2.0 V p-p into 75 Ohms Impedance Input: 75 Ohms 10% with Terminal On/Off Switch Output: 75? 10% with OUT/THRU Switch Sampling Frequency 44.1 48, 88.2, 96, 176.4, and 192 kHz Audio Performance EIN Mic Amp: -127 dBu or Lower Frequency Response Mic/Line to Line Output 20 Hz to 40 kHz, 0.5 dB 40 kHz 80 kHz 5 dB Mic/Line (Analog) to Digital Output (S/MUX) Fs 44.1/48 kHz: 20 Hz to 20 kHz 0.5 dB Fs 88.2/96 kHz: 20 Hz to 40 kHz 0.5 dB Fs 176.4/192 kHz: 20 Hz to 80 kHz 5 dB Signal to Noise Ratio Mic/Line/Instrument Input to Line Output: 116 dB Mic/Line/Instrument Input to Digital Output (S/MUX): 113 dB at FS 44.1 kHz and 48 kHz; 111 dB at Fs 96 kHz THD Mic/Line to Line Output: 0.0007% Instrument to Line Output: 0.0009% Mic/Line/Instrument to Digital Output (S/MUX): 0.001% Crosstalk Mic to Line Output: 119 dB Mic to Digital Output (S/MUX): 114 dB Physical Power 12 VDC (Dedicated AC Adapter) Power Consumption 16 W Operating Temperature 32 to 104F / 0 to 40C Dimensions (W x H x D) 19 x 1.8 x 9" / 48.2 x 4.4 x 22.8 cm Weight 5.7 lb / 2.6 kg - All international buyers are responsible for all tax, duties and/or customs fees.