Y Strainer 1/2 Brass Sediment Filter Attachment Water Filter, On 0.5 Inch Dn15 0 Brass Y strainer with cast brass body and a stainless steel filter gauze. The filter can be easily removed and serviced by unscrewing the hexagonal cap on the strainer. This is an inline strainer with a Y shaped construction. The strainer has female threaded ports. Specification: Mesh: 40 Material: Brass Connection: Female Thread Nominal Pressure: 1.6MPa Applicable Temperature: -10?+120? Applicable Medium: Water, Oil Size: DN15(1/2''): Connector: approx 20mm/0.79inch; Length: approx 45mm/1.77inch DN20(3/4''): Connector: approx 25mm/0.98inch; Length: approx 58mm/2.28inch Package Includes: 1x Y Shaped Strainer Filter Valve 1x Seal Tape Quanlity Assurance: If you encounter any problems after purchase, please contact us in time, we provide 30 days of return and replacement service. Note: 1. Due to the difference between monitors and light effect, the pictures may not reflect the actual color of the item. 2. Please allow slight error due to manual measurement. Thanks for your understanding. 40 mesh 304 stainless steel screen Brass Y strainer is often used for upstream installations to protecct water jeater, control valves, and pumps from unwanted solids like rust and pipe scale. Min temperature: -10? Max temperature: +120? Max pressure: 16 bars Y brass strainer has an arrow on it's body pointing the direction of the flow. Also, the sediment collector branches off in the same direction as the flow. WYE strainer can be installed in either position as long as the tapping at the bottom of the sediment collector is pointing down. This way, the solids can be properly entrapped and easily purged.