This Zander KA-MT 4 Ecodry Adsorption Dryer Oil-Free Compressed Air Purification is in excellent condition, tested, and is guaranteed to function 100%. This system came from a local lab that had it prepared for installation but was never put into operation. We can accept PayPal or your credit card. Please contact feel free to contact us with any questions. K-MT 1-8 heatless desiccant dryers are designed to dry industrial compressed air reliably and efficiently down to a pressure dewpoint of -100F (-70C ). The units are constructed in a compact manner and designed to be free-standing or wall mounted. They are equipped with built-on pre- and after- filtration and are sized for volumetric flows of up to 50.6 scfm (86 m3 /h) (suction capacity of the compressor referring to a compression of 101.5 psi (7 bare )). Compressed air first enters the validated GL pre-filter. Continuing on, the air flows into one of two twin-vessels (twin-chamber aluminium profiles); both filled with molecular sieve - a renowned drying-agent, where the air is dried. During the drying process, the second chamber undergoes regeneration: At the start of the drying-cycle, this chamber is open to atmosphere and a small proportion of dried compressed air passes through the desiccant bed, transporting the humidity out. When this procedure is complete, the chamber is re-pressurized in readiness to repeat the drying procedure. Continuous, uninterrupted operation is maintained utilizing so called pressure-swing technology together with individually operated main- and exhaust valves. Model #: K-MT 4 Current Model # K4/16D2-N115M Volumetric flow1) in scfm (m3 /h): 21 (35) Nominal pipe size: 1/4 Pre-filter: GL2XL After-filter: GL2ZLH Nominal Pressure in bare (psi): 16 (232) Nominal Temp. F (C): 122 (50) Operating Pressure: 7 bar Design Pressure: 16 bar MFG#: 06/45042 Year of MFG: 2006 Medium: Air Min Operating Temp: +1C Max Operating Temp: 16 bar Voltage: 110 HZ: 50/60 Track Page Views With Auctiva's FREE Counter